Key takeaways
- Start the review from the network and device conditions the field staff actually face.
- Write the sync contract as data rules, including what happens after a long offline period.
- Decide conflict handling per record type instead of applying one policy to the whole app.
- Test storage limits, eviction, and app restarts on the oldest supported handset.
- Record which product decisions the offshore team can make and which belong to the buyer.
Start from the field conditions
Open the review with the conditions the app must survive, not with the framework. Name the devices, the operating systems, the typical offline duration, and the places where connectivity returns in bursts. A field app used in a basement and one used on a moving vehicle face different constraints. Write those conditions down before anyone proposes a storage engine or a sync library.
Ask the support staff how users work around the current system. Their answers usually reveal the real requirement, such as photographing a form before submitting it or writing values on paper for later entry. Turn each workaround into a test case the new design must satisfy. A design that removes the workaround without replacing its purpose will be abandoned in the field.
Define the sync contract
The sync contract states what the client may write offline, when it uploads, and what the server returns. Write it as a short list of data rules rather than a diagram of arrows. Include the maximum offline period and the behavior when that period is exceeded. A contract that assumes connectivity every few minutes will fail for the user who spends a full shift in a dead zone.
Specify the identifiers the client creates before the server sees the record. Temporary identifiers must map cleanly to server identifiers after upload, or the user will see duplicates. State how retries behave when a response is lost after the server committed the write. Idempotency belongs in the contract, not in a later bug fix, because a duplicate work order is a visible failure in the field.
Review conflict handling
Conflicts are normal in an offline system, so the review should name the policy for each record type. A field observation might accept the last writer, while an inventory count needs a merge or a manual review. Apply the policy per record rather than choosing one global rule for convenience. The design should show what the user sees when a conflict appears and who resolves it.
Check that the conflict path is testable without a second device. The team should be able to simulate an older client, a delayed upload, and an edited server record in a test harness. If the only way to reproduce a conflict is to coordinate two phones in real time, the behavior will stay unverified. Add the simulation to the review evidence and keep it in the repository.
Check storage limits and eviction
Ask how much data one user can accumulate before the app must evict something. Photos, signatures, and attachments grow faster than text records, and a device can run out of space during a shift. Define what is safe to delete and what must stay until the server confirms receipt. A cache that drops an unsent record turns a storage problem into a data loss incident.
Review the behavior after an app update, a device restart, and an operating-system storage warning. These are the moments when incomplete writes become visible. Test on the oldest supported handset with a realistic data set rather than a new phone with an empty cache. Record the observed behavior and the recovery step in the review notes. A user who loses an unsent record will not trust the next release, so this test deserves the same attention as a login flow.
Test on the devices that exist
The buyer's device fleet is part of the architecture. List the models, the operating-system versions, and the management policies that affect storage or background work. A design that depends on a background sync service may be stopped by the device vendor's battery rules. Test that path on a real managed device, not only in a browser emulator. Record the exact model and operating-system build beside each result so a later failure can be compared with the tested baseline.
Include a slow-network profile and an intermittent-network profile in the test plan. Toggle airplane mode during an upload and confirm the app recovers without losing the record. Repeat the test after a forced logout, because token refresh during an offline period is a common failure. The results belong beside the design so the reviewer can see what was proven. Keep the network profile file in the repository so every engineer tests against the same conditions.
Write the acceptance note
Close the review with a note that states what was tested, what was simulated, and what remains unproven. Separate the conditions the team reproduced from the ones it only reasoned about. The buyer should be able to see which field scenarios are covered before the build starts. An acceptance note that claims full coverage without naming the gaps is not useful to anyone.
Give each unproven condition a test owner and a date before the first release. Some conditions, such as a week-long offline period, cannot be verified in a short review. Those should become a monitored trial with a small user group rather than an assumption. The note should say how the trial will be stopped if a data loss or conflict pattern appears.
Record the decisions the buyer must own
Some choices in an offline design are product decisions, not engineering preferences. How long a user may work offline, which conflicts need a supervisor, and what data may be removed are examples. Mark those decisions in the review and name the buyer-side owner for each one. An offshore team can recommend an option, but it should not quietly choose the business rule.
Close the review with a short list of accepted risks and open questions. Assign each open question an owner and a date, and keep the list beside the design document. When the next iteration starts, the team can see which assumptions were tested and which were only discussed. A design review that ends without that list usually restarts the same conversation later.
Questions about assessing Philippine developers
Does offline-first require a local database?
Not always, but the design must persist writes somewhere durable before the upload succeeds. The choice between a database, a file queue, and device storage depends on the data size and the query needs.
Who decides the conflict policy?
The buyer-side product owner sets the business rule, and the engineering team shows the cost and the user impact of each option. The review should record the chosen policy per record type.
How many devices belong in the test matrix?
Cover the oldest supported model, the most common model, and any device with a management policy that changes background behavior. A larger matrix helps, but those three usually expose the design flaws.
